X-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteries

 
X-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteries

X-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteriesX-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteriesX-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteriesX-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteriesX-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteriesX-Charger XC-02 Lithium Waterproof Bike / Car Battery Charger, 1 Ah, for every 12V LiFePo4 batteries  

Manufacturer: X-Charger

Part Number: XC-02

This Product is available in our warehouse

Customer Questions & Answers: ( 1 )

Compatibility with my bike

Choose brand and model

 

Our Price
€ 36,89

(Discount: 18,03%)
MSRP: € 45,00
  You save: € 8,11

 
Availability: In Stock
This Product is available in our warehouse
Shipping (  U.S.A.): € 9,00
(International Standard 4 business days)

 

Downloads:



  Description

XC-02 is the most Compact Battery Charger / Maintainer Specific for LiFePO4 Batteries


FULL AUTOMATIC Connect and Forget 12V Charger, performs Steps Charging and Maintenance. Just plug it in and it does everything itself. You can leave it connected for long periods without any manual intervention.

 

Key Features:

  • Full Automatic Optimal Charging, Full Automatic Maintenance Charging.
  • Compact: Length 99mm, Width 50mm, Height 39mm
  • IP68 : Dust Tight (complete protection against dust), Water Immersion Proof. XC-01 can be used outdoors, can be used in extreme conditions/environments.
  • Protects Vehicle Electronics: no risk of damage to any electronic part.
  • Spark-Free, Reverse Polarity Protected and Short Circuit Proof.
  • Final Charge Optimization : always charges the battery to full capacity.
  • Maintenance: Controls and keeps batteries charged during periods of non-use.
  • Compatibility : the connecting plug is an SAE Connector used by most of the automotive manufactures, so that you can use all SAE compatible accessories, such as cigar plugs, USB plugs, OEM plugs etc.

 

What's Included:

XC-02, 180cm power cord ending with CEE 7/16 Plug (Europlug), 140cm battery cord ending with SAE Connector. Led: Yellow = Charge | Led: Green = Maintenance | Led: Red = Power

Weatherproof Permanent Battery Lead, 3A fused, length 60cm. Terminals: 8,5mm Eyelet > SAE Connector.

Fast Connection Battery Lead , length 60cm. Terminals: Clamps > SAE Connector.
Quick wall mount, screws included.

 

How To Connect:

  • Using the included Fast Connection Battery Lead, just connect Clamps to the battery.
  • Using the included Battery Lead.
  • Using an optional cigar plug cord.
  • Using any of the SAE Connectors, for example Ducati DDA, MV, Triumph, BMW, etc.

 

How it Works :

BATTERY CHECK: If battery voltage is over 3V Starts Charging, if battery voltage is under 3V stands by.
BULK CHARGE : Charging using 1A Max Current until battery voltage reaches 13,5V.
CONSTANT CHARGE: Charging using 0,6A, battery slowly reaches the maximum capacity without overheating.
ABSORPTION - FULL CHARGE : once battery reaches full capacity (about 14.4, depending on the status and capacity of every battery), the current declines quickly until the voltage reaches 14.5V.
CONTROL : monitoring if the voltage drops below 13,2V.
CONSTANT CHARGE MAINTENANCE: if the voltage drops below 13,2 starts constant charge maintenance at 0,6A; once battery reaches 14,2V, returns to STEP 5.

 

MORE MAINTENANCE FUNCTIONS:

CHARGE REACTIVATION : if the above function does not produce any result and the voltage drops below 12V, starts bulk charge at 1A until voltage reaches 13.5V, it is like it comes back to STEP 2. This step is a sign of a critical battery problem.

 

STATUS
Voltage
Current
LED
POWER
CHARGE
MAINTENANCE
STANDBY
0
0
BATTERY CHECK
< 3V
0
> 3V
1A
BULK CHARGE
3V>13,5V
1A
CONSTANT CHARGE
13,5V > 14,4V
0,6A
ABSORTION - FULL CHARGE
14,4V > 14,5V
0,6A > 0,1A
CONTROL
14,4V > 13,2V
0A
CONSTANT CHARGE MAINTENANCE
13,2V - 14,2V
0,6A
CHARGE REACTIVATION
<12V
1A

Charger can stay connected to the battery for long periods. In case of power blackout, once power is restored, charger automatically reactivates starting from the battery check. In any case don't leave batteries unattended and connected for long periods.

FAQ:

  • Q: Which kind of batteries can be charged ?A: XC-02 is specific for every LiFePO4 Lithium Battery. XC-02 Charging and Maintenance cycle is completely different from a lead acid batteries charger. Bulk charges until battery voltage reaches 13,5V, then charges slowly until battery capacity reaches 95% and finally uses a very low current until battery reaches 14,5V. Then XC-02 starts maintenance checking the battery voltage. Since Lithium battery self discharge rate is very low, XC-02 reactives charge only if the voltage drops below 13,2V starting constant charge maintenance at 0,6A; once battery reaches 14,2V, returns to STEP 5. The main difference between a lead acid charger is that all lead acid chargers charge until battery reaches 14,7V, and maintenance is provided by pulsing current. Also most of the lead acid chargers starts using "desolfation mode" which is considered the Lithium battery killer.
  • Q: Can I use this to charge a Lead - Acid Battery ? A: Yes, you can use it. We tested also on lead acid batteries, constantly monitoring the current and voltage, XC-02 successfully completed the charging and maintenance cycle of a lead acid battery, and did not compromise the battery in any way. However, XC-02 is not specific for lead acid batteries; lead acid batteries require different charging cycle. Also because they discharge very slowly, they do not need pulse maintenance (required to maintain lead acid batteries). The specific model for lithium batteries is XC-01.
  • Q: What is the difference between Maintainer and Charger? A: a maintainer keeps battery charged for long periods without the need to be disconnected. A charger once the battery reaches full capacity has to be disconnected. XC-02 Charges and Maintains, just Connect and Forget.
  • Q: I received XC-02, plugged to the main power, then I measured the current and there was no output, is this normal? A: Yes, XC-01 supplies current only when it is connected to a battery.
 
  Customer Questions & Answers
Question:
 Does this charger work on 240vac 50hz? I am in Singapore.
15/09/2015
Answer:
Yes, it works.

New Question
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone; if any information is added the whole question will be canceled.
 
 I have read and integrally accept information about use of personal data
*obligatory fields (will not be displayed, we only need them to send you the answer)

  Works on my Bike?
  • Aprilia 
  • Benelli 
  • Beta 
  • Bimota 
  • BMW 
  • Buell 
  • Cagiva 
  • Ducati 
  • GAS GAS 
  • Gilera 
  • Harley-Davidson 
  • Honda 
  • Husaberg 
  • Husqvarna 
  • Hyosung 
  • Kawasaki 
  • KTM 
  • Kymco 
  • Malaguti 
  • MBK 
  • Morini 
  • Moto Guzzi 
  • MV Agusta 
  • Peugeot 
  • Piaggio 
  • Suzuki 
  • Sym 
  • TM 
  • Triumph 
  • Vespa 
  • Vor 
  • Yamaha 
   Linked Products